Communication settings
- CAN 2.0B, standard 11-bit identifiers; ISO 11898 physical layer.
- Default speed: 250 kbit/s. Message types and identifiers are CANopen-compatible.
- Multibyte values use little-endian byte order; signed values use two's complement.
- The base IND1X Node ID is
0x68. The table lists identifiers for this Node ID.
Messages
| ID | Message | Direction | Length | Interval |
|---|
0x1E8 | Status 1 (TPDO1) | IND1X → all | 8 bytes | 100 ms |
0x4E8 | Identification (TPDO4) | IND1X → all | 8 bytes | 1000 ms |
Status 1 — 0x1E8
| Bytes | Type | Contents |
|---|
| 0 | i8 | Ambient temperature, 1 °C/bit; 0x80 (−128) means unavailable |
| 1–7 | — | Reserved |
The value 0x80 is transmitted when measurement fails or the temperature sensor is not installed.
Identification — 0x4E8
| Bytes | Type | Contents |
|---|
| 0–3 | u32 | Device UID |
| 4 | u8 | Hardware revision |
| 5 | u8 | Firmware major version |
| 6 | u8 | Firmware minor version |
| 7 | u8 | Firmware patch version |