Skip to main content

Indication IND10

IND10 shows the battery state of charge (SOC) on a 10-segment LED bar.

LED indication​

StateIndicationExample
Start-up or no BMS connectionThe green bar fills one segment at a time; after 10 segments it clears and starts again.IND10 start-up
NormalGreen bar. A full segment = 10%; a remainder uses reduced brightness.IND10 normal SOC
Charger connectedSame as in the Normal state.IND10 charger connected
ChargingGreen bar; a highlighted segment moves from the last LED to the first.IND10 charging
BalancingGreen bar; a highlighted segment moves back and forth.IND10 balancing
Low SOCSteady orange bar.IND10 low SOC
Very low SOCSteady red bar.IND10 very low SOC
Deep dischargeThe first segment pulses red.IND10 empty
FaultAll 10 segments pulse red.IND10 fault
Over-temperatureThe central pair of segments (5 and 6) pulses yellow.IND10 over-temperature
Under-temperatureSegments 4 and 7 pulse yellow.IND10 under-temperature
Over-voltageSegments 3 and 8 pulse red.IND10 over-voltage
Under-voltageSegments 2 and 9 pulse red.IND10 under-voltage
Over-currentThe end pair of segments (1 and 10) pulses red.IND10 over-current

Sound​

BMS eventSound
Normal, charging or balancingSilent
Low SOCOne short beep about every 3 minutes
Very low SOC or emptyThree short beeps about every minute
FaultFrequent short beeps, about once per second